Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
Braintree Scientific Polyethylene .034"""" x .060"""" Per Ft.,1000 ft. Continuous
Polyethylene Tubing Polyethylene is a relatively rigid polymer suitable for short-term catheterizations and for ex vivo applications. Polyethylene sleeves can be slipped over less rigid catheter materials (MicroRenathane, RenaSil™) at suture points to protect the latter from inadvertent constriction **Sold for research purposes only and not for human use**
Braintree Scientific Polyethylene .023"""" x .038"""" Per Ft.,200 ft. Continuous
Polyethylene Tubing Polyethylene is a relatively rigid polymer suitable for short-term catheterizations and for ex vivo applications. Polyethylene sleeves can be slipped over less rigid catheter materials (MicroRenathane, RenaSil™) at suture points to protect the latter from inadvertent constriction **Sold for research purposes only and not for human use**
Braintree Scientific Polyethylene .030"""" x .048"""" Per Ft., 1000 ft. Continuous
Polyethylene Tubing Polyethylene is a relatively rigid polymer suitable for short-term catheterizations and for ex vivo applications. Polyethylene sleeves can be slipped over less rigid catheter materials (MicroRenathane, RenaSil™) at suture points to protect the latter from inadvertent constriction **Sold for research purposes only and not for human use**
Pacer Global LLC Saint-Gobain - SaniTech Ultra-C Tubing, 0.25'' ID, 0.4375'' OD, 0.09375'' Wall, 25 Foot Coil, 1/EA - ULTRA-C-250-3
Saint-Gobain - SaniTech Ultra-C Tubing, 0.25" ID, 0.4375" OD, 0.09375" Wall, 25 Foot Coil, 1/EA
Pacer Global LLC Saint-Gobain - 374 C-Flex TPE Tubing, 0.25'' ID, 0.438'' OD, 0.094'' Wall, 300 Foot Coil, 1/EA - 374-250-3M
Saint-Gobain - 374 C-Flex TPE Tubing, 0.25" ID, 0.438" OD, 0.094" Wall, 300 Foot Coil, 1/EA
Braintree Scientific Polyethylene .015"""" x .043"""" Per Ft.,100 ft. Continuous
Polyethylene Tubing Polyethylene is a relatively rigid polymer suitable for short-term catheterizations and for ex vivo applications. Polyethylene sleeves can be slipped over less rigid catheter materials (MicroRenathane, RenaSil™) at suture points to protect the latter from inadvertent constriction **Sold for research purposes only and not for human use**
Pacer Global LLC Saint Gobain 072 C-Flex TPE Tubing, Opaque, 0.5'' ID, 0.75'' OD, 0.125'' Wall, 50 Foot Coil, 1/EA
Saint-Gobain - 072 C-Flex TPE Tubing, Opaque, 0.5" ID, 0.75" OD, 0.125" Wall, 50 Foot Coil, 1/EA
Pacer Global LLC Saint-Gobain - SaniTech-C Tubing, 1'' ID, 1.5'' OD, 0.25'' Wall, 25 Foot Coil, 1/EA - STHT-C-1000-6
Saint-Gobain - SaniTech-C Tubing, 1" ID, 1.5" OD, 0.25" Wall, 25 Foot Coil, 1/EA
Pacer Global LLC Saint-Gobain - SaniTech-C Tubing, 0.125'' ID, 0.3125'' OD, 0.09375'' Wall, 25 Foot Coil, 1/EA - STHT-C-125-3
Saint-Gobain - SaniTech-C Tubing, 0.125" ID, 0.3125" OD, 0.09375" Wall, 25 Foot Coil, 1/EA
Pacer Global LLC Saint-Gobain - 374 C-Flex TPE Tubing, 0.375'' ID, 0.5'' OD, 0.0625'' Wall, 200 Foot Coil, 1/EA - 374-375-2M
Saint-Gobain - 374 C-Flex TPE Tubing, 0.375" ID, 0.5" OD, 0.0625" Wall, 200 Foot Coil, 1/EA
Pacer Global LLC Saint-Gobain - 374 C-Flex TPE Tubing, 0.375'' ID, 0.564'' OD, 0.0945'' Wall, 200 Foot Coil, 1/EA - 374-375-3M
Saint-Gobain - 374 C-Flex TPE Tubing, 0.375" ID, 0.564" OD, 0.0945" Wall, 200 Foot Coil, 1/EA
THERMO SCI 3P AIG PARTS & ACCESSORIES 6MM POLYURETHANE TUBING 1M
NC1306839 6MM POLYURETHANE TUBING 1M
AVANTOR MASTERFLEX (VWR LLC) Dow Corning Pharma-50 Tubing,1/2"" x 3/4"", 50 ft Pack
Applications: Pharmaceutical, biotechnology , and ultra-pure fluid processing. Characteristics: 50 durometer, translucent platinum-cured silicone tubing with a very low extractable profile; it contains no phthalates, plasticizers, latex, or other organic additives. Pharma tubing remains flexible and resilient for long service life. Dow Corning maintains complete traceability from silica to silicone tubing. Certifications: Elastomer exceeds test guidelines for USP Class VI Plastics, and the tubing itself is FDA compliant, and meets 3A Sanitary Standards and European Pharmacopoeia (EP) requirements. Produced under Bulk Pharmaceutical (BP) and current GMP principles. Temperature range: ¿60 to 460¿F (¿51 to 232¿C) Sterilize: Autoclave, ethylene oxide, or gamma irradiation.
Med Vet International Miltex Meniscus Probe, 7-1/2in, 1.3mm Probe Tip, 27-99
Miltex Meniscus Probe, 7-1/2in, 1.3mm Probe Tip, 27-99